Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Ganovichev, D. A.*; Baklanov, V. V.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
In order to ensure In-Vessel Retention (IVR) of molten-core in Core Disruptive Accident (CDA), we are investigating the possibility of the molten-core discharge through the control rod guide tube (CRGT) to prevent energetics due to exceeding the prompt criticality. Internal structures of the CRGT, such as a sodium-flow regulator when the CRGT is connected to the high-pressure plenum, may disturb the discharge of molten-core from the core region. Based on above background, an experimental program to clarify characteristics of molten-core discharge through the CRGT has been commenced as one of subjects under a joint study with National Nuclear Center of the Republic of Kazakhstan (NNC-RK) named EAGLE-3 project. An experiment using molten-alumina as fuel simulant and sodium was conducted at the out-of-pile test facility owned by NNC-RK to investigate sodium cooling effect around the sodium flow regulator on its destruction. The experimental result represented that void development at the initiation of molten-alumina discharge eliminated liquid-phase sodium from the discharge path and this also eliminated sodium cooling effect around the sodium flow regulator. As a result, early destruction of the sodium flow regulator and massive discharge of molten alumina occurred in turn.
Ohgama, Kazuya; Takegoshi, Atsushi; Katagiri, Hiroki*; Hazama, Taira
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
Ohgama, Kazuya; Ota, Hirokazu*; Oki, Shigeo; Iizuka, Masatoshi*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
Mukaida, Kyoko; Kato, Atsushi; Kamiya, Masayoshi; Ishii, Katsunori
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
The levelized cost of electricity is one of key indicator to evaluate economic competitiveness of energy systems. This report estimated the levelized cost of SFR system considering additional safety measures identified after the 1F incident and social cost, using major calculation tools: G4-ECONS and the calculation tool developed by the Governmental WG in Japan (CEWG-tool). The calculation results of G4-ECONS showed that the additional safety measures raise 160% of levelized cost in the case of the safety enhanced SFR system with 1500 MWe of twin looped cooling system. As a result of calculation with 3% discount rate and social cost, the levelized cost of the safety enhanced SFR system with 1200 MWe of Single looped cooling system was estimated 84 mills/kWh by CEWG-tool. This result is almost equal to the estimated levelized cost of similar standard LWR system, and it was indicated the economic competitiveness of the future SFR system.
Kato, Atsushi; Mukaida, Kyoko
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
Improvement of economic competitiveness is a part of key requirement in the project. By adopting innovative technologies to reduce plant commodities, JSFR could achieve economic competitiveness compared with LWR. After the Fukushima-Dai-ichi Nuclear Power Plants accident, safety enhancement measures were added on LWR in Japan mainly against external hazards. In parallel, Safety Design Criteria and Guidelines (SDC/SDG) for SFR were constructed in the framework of Generation IV international forum. Design studies of JSFR were carried out responding to GIF SDC/SDG and lessons learn from the Fukushima accident. This reports an impact of recent safety design enhancements on JSFR construction cost. Safety design enhancement adopted in JSFR.
Takano, Kazuya; Sakamoto, Yoshihiko; Morohoshi, Kyoichi*; Okazaki, Hitoshi*; Gima, Hiromichi*; Teramae, Takuma*; Ikarimoto, Iwao*; Botte, F.*; Dirat, J.-F.*; Dechelette, F.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
ASTRID has the objective to integrate innovative options in order to prepare the 4th generation reactors. In ASTRID, large number of tubes are installed above each fuel subassembly to monitor the core. These instrumentations such as thermocouples (TC) and Failed Fuel Detection and Location (FFDL) systems are integrated into Above Core Structure (ACS) with various sizes tubes. In the present study, the routing study for TC tubes and FFDL tubes was performed with 3D modeling and mock-up experiment of the ACS designed for ASTRID with 1500 MW thermal power in order to clarify the integration process and secure the design hypotheses. Although some problems on fabricability were found in the mock-up experiment, the possible solutions were proposed. The present study gives manufacturing feedback to design team and will contribute to increase the knowledge for ACS design and fabricability.
Chikazawa, Yoshitaka; Takaya, Shigeru; Tagawa, Akihiro; Kubo, Shigenobu
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 6 Pages, 2019/05
A maintenance management required to prototype nuclear power reactors has been developed. One of important mission of a prototype reactor is to develop maintenance program for commercial reactors step by step securing safety. Since operating experience at the early stage is limited, the maintenance program for the prototype reactor should be a progressive one. It has to be modified and improved frequently taking into account R&D insight and operation experiences. Additionally, the maintenance program has to consider features of the prototype reactor even at the early stage. To select maintenance grades on particular components/systems, risk informed and graded approaches are effective. And maintenance programs have to take into account degradation mechanism originally due to reactor features. In this paper, applications for maintenance program on sodium valves of prototype fast breeder reactor Monju are studied as an example of prototype sodium-cooled reactors (SFR).
Segawa, Tomoomi; Kawaguchi, Koichi; Kato, Yoshiyuki; Ishii, Katsunori; Suzuki, Masahiro; Fujita, Shunya*; Kobayashi, Shohei*; Abe, Yutaka*; Kaneko, Akiko*; Yuasa, Tomohisa*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
A solution of plutonium nitrate and uranyl nitrate is converted into a mixed oxide by microwave heating denitration method. In the present study, for improving the efficiency of microwave heating and achieving high-temperature uniformity to produce homogeneous UO
powder, the microwave heating test of potassium chloride and uranyl nitrate solution, and numerical simulation analysis were conducted. The potassium chloride agar was adjusted to the dielectric loss, which is close to that of the uranyl nitrate solution and the optimum support table height was estimated to be 50 mm for denitration of the uranyl nitrate solution by microwave heating. The adiabator improved the efficiency of microwave heating denitration. Moreover, the powder yield was improved by using the adiabator owing to ease of scraping of the denitration product from the bottom of the denitration vessel.
Ishii, Katsunori; Segawa, Tomoomi; Kawaguchi, Koichi; Suzuki, Masahiro
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 5 Pages, 2019/05
Japan Atomic Energy Agency (JAEA) is developing a simplified pelletizing process for MOX fuel fabrication. In this process, the flowability of MOX powder produced by de-nitration conversion based on microwave heating, calcination, and reduction is improved using the wet granulation method. In a previous paper, to produce MOX granules of appropriate sizes for pelletizing them effectively, we proposed a granulation system composed of a wet granulator and a sizing machine. In the present work, we modernized the wet granulator, completed the granulation system by adding auxiliary equipment, and conducted performance tests of the granulation system with WO powder. The results of a performance test indicated that it is possible to convert raw powder into granules characterized by appropriate size and excellent flowability. The time required to process 5 kg of WO powder was about 70 min, which almost satisfies the target time.
Aizawa, Kosuke; Chikazawa, Yoshitaka; Ara, Kuniaki; Yui, Masahiro*; Jinno, Kentaro*; Hiramatsu, Takashi*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 7 Pages, 2019/05
Inspection technique in opaque liquid metal coolant is one of important issues for sodium-cooled fast reactors. Various under sodium viewers (USVs), including horizontal USVs for obstacle detection and imaging USVs, have been developed in several research institutes and countries. We aim practical realization of imaging USV which adopts an optical receiving system, which measures the vibration displacement of diaphragm by using a laser as a receiving sensor. This study mainly focuses on the sensitivity improvement of a receiving sensor. An issue for the sensitivity improvement of the receiving sensor is the sound pressure propagation inside the receiving sensor. Prototype tests in the water and sodium were conducted in order to resolve the issue. In addition, imaging experiments in the water and sodium were conducted using the improved receiving sensor. From the results of imaging experiments, the relation between obtained wave profile and the regeneration imaging was confirmed.
Yamamoto, Tomohiko; Matsubara, Shinichiro*; Harada, Hidenori*; Saunier, P.*; Martin, L.*; Gentet, D.*; Dirat, J.-F.*; Collignon, C.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
Japan-France collaboration on ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) project is launched in 2014. In this project, Japan-France evaluates core assemblies with interferences on seismic event. The object of this study is to verify the seismic evaluation method on core assemblies between Japan and France by comparing the results. The analysis of this benchmark calculation shows a satisfactory agreement between the Japanese and French tools and the figures show a good behavior of the core in horizontal direction under French seismic condition.
Abe, Yuta; Otaka, Masahiko; Okazaki, Kodai*; Kawakami, Tomohiko*; Nakagiri, Toshio
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 7 Pages, 2019/05
Since the hardness of fuel debris containing boride from B
C pellet in control rod is estimated to be two times higher as that of oxide, such as UO
and ZrO, it is necessary to select the efficient and appropriate operation for removal of fuel debris formed in the severe accident of nuclear power plants. We focused on the characteristics of LIBS, an innovative rapid chemical in-situ analysis technology that enables simultaneous detection of B, O, and other metal elements in fuel debris. Simulated solidified melt specimens were obtained in the plasma heating tests (CMMR-0/-2, performed by JAEA) of simulated fuel assembly (ZrO is used to simulated UO pellet, other materials such as stainless steel, BC are same as fuel assembly). The LIBS signals of (B/O)/Zr ratio showed good linear relationship with Vickers hardness. This technique can be also applied as in-situ assessment tool for elemental composition and Vickers hardness of metal-oxide-boride materials.
Nakayama, Takuya; Nomura, Mitsuo; Mita, Yutaka; Yonekawa, Hitoshi*; Bunbai, Misako*; Yaita, Yumi*; Murata, Eiichi*; Hosaka, Katsumi*; Sugitsue, Noritake
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
Clearance of contaminated metal is important for recycling and volume reduction of radioactive waste. Among applicable decontamination technologies, immersion method with ultrasonic cleaning is considered to be effective for metal materials having various shapes. in this study is to demonstrate decontamination of carbon steel contaminated by uranium hexafluoride to the target level for clearance (less than 0.04 Bq/cm
), and minimize secondary waste. In this test, acidic electrolytic water, dilute hydrochloric acid, dilute sulfuric acid and ozone water with various pH and redox potential were used as decontamination solutions to be tested. We found that acidic electrolytic water is effective solution for decontamination of carbon steel contaminated by uranium hexafluoride. It could be decontaminate less than target level for clearance, and reduced secondary waste relatively.
Kudo, Hideyuki*; Otani, Yuichi*; Hara, Masahide*; Kato, Atsushi; Ishikawa, Nobuyuki; Otaka, Masahiko; Nagai, Keiichi; Saito, Junichi; Ara, Kuniaki; Ide, Akihiro*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
A next generation SFR in Japan has adopted an advanced dry cleaning system which consists of the argon gas blowing process to reduce the amount of metallic residual sodium remaining on spent fuel assemblies. This paper describes experimental and analytical work focusing on the amount of residual sodium remaining on a fuel pin bundle before and after the argon gas blowing process. The experiments were conducted using a sodium test loop and a short specimen consisting of a 7 pin bundle. The effects of the blowing gas velocity and the blowing time were quantitatively analyzed in the experiments. On the basis of these experimental results, evaluation models predicting the amount of the residual sodium were constructed.
Ide, Akihiro*; Kudo, Hideyuki*; Inuzuka, Taisuke*; Hara, Masahide*; Kato, Atsushi; Ishikawa, Nobuyuki; Otaka, Masahiko; Nagai, Keiichi; Saito, Junichi; Ara, Kuniaki
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
A next generation SFR in Japan has adopted an advanced dry cleaning system which consists of the following process of argon gas blowing to reduce the amount of metallic sodium, moist argon gas blowing to deactivate the residual sodium, and direct storage in the SFP without using storage containers. This three-step process increases economic competitiveness and reduces waste products. In this Research and Development work, the amount of residual sodium and performance of the dry cleaning process were investigated. This paper describes experimental and analytical work for all parts of a fuel assembly except for a fuel pin bundle.